PS5 controller testing in Elk Grove

How does our controller drift test work?

We plug your PS5 controller into a counter PC and read where each stick rests, how far it reaches and whether every button works. The test runs when you check the controller in and again after the repair, and you get both results side by side by text.

What does each step look like?

Pick a step, then switch between a worn stick and one after repair. Drag the stick to turn it, or tap See inside to take it apart.

Inside each potentiometer, a metal wiper rides on a carbon track. On this worn stick the track is scuffed and dusty where the stick rests, so the reading wanders off center.

Inside each potentiometer, a metal wiper rides on a carbon track. A new module has a clean track, so the reading at rest sits in the middle.

Drag to turn

On your results page

Drifting

Hands off

Rests in the red ring

Hands off for 1.5 seconds. This stick comes to rest well away from the middle, out in the red ring, with a line from the middle to its dot. That is drift.

What is stick drift?

Drift is a stick that moves on screen when nobody is touching it. Each thumbstick module sits on two small potentiometers, one for left and right and one for up and down. They wear with use, so the reading at rest wanders off center.

How do we test it?

Four parts, all on the counter, with our own system reading the controller directly.

  1. Step 01

    Rest

    The controller is plugged into a counter PC by USB. Hands come off both sticks for 1.5 seconds while our system reads where each stick sits.

  2. Step 02

    Range

    The technician rolls each stick slowly around its outer edge 3 times. The system records how far the stick reaches in 48 directions and draws that path.

  3. Step 03

    Buttons

    Every button is pressed once, L2 and R2 are pulled all the way, the touchpad is swiped end to end and the controller is tilted to check motion.

  4. Step 04

    Before and after

    The test runs when you check the controller in and again after the repair, so there is a reading from each.

What does the result mean?

Your results page has a drawing for each part of the test. Here is how to read them.

  • 01

    The target

    Where each stick sat with nobody touching it. The dot sits at its real distance from the middle, with a line out to it when it is off. The green middle is centered, the amber ring is off center and the red ring is drifting. Even a few percent off center shows.

  • 02

    The reach

    The blue line the stick traced around its edge, over a gray circle. Circularity is how far that path is from a perfect circle. Sony ships its controllers at about 10 percent, which is what games expect. A worn stick reads higher, or its path comes out lopsided.

  • 03

    The controller

    A drawing of your controller from above. Each part turns green when it works, red if it never registered and amber if it stays pressed.

  • 04

    Side by side

    The result from check in and the result after the repair come together in one text link, so you can compare them yourself.

How do we fix drift?

We replace the stick module rather than hide the problem with deadzone settings. A deadzone only tells games to ignore small movements near the center, and the worn part is still there. After the repair the same test runs again, so you can see the difference.

Every repair is quoted after inspection, before any work starts. More on console repair

Which controllers does the test read?

The USB test reads PlayStation controllers: DualSense, DualSense Edge and DualShock 4. We repair stick drift on Xbox controllers and Joy-Cons too, but this test does not read them.

Find us in Elk Grove

Address

8145 Elk Grove Blvd, Suite 12, Elk Grove, CA 95758

Hours

Mon-Fri: 10:00 AM to 5:00 PMSat: 10:00 AM to 3:00 PMSun: Closed

Stick drifting? Bring the controller in.

Every repair is quoted after inspection, before any work starts.

Get a callback

Drop your name and number. A technician at our Elk Grove shop will reach out.